垃圾炉一次风量对炉床燃烧影响的仿真研究

针对垃圾焚烧炉床层内垃圾燃烧过程复杂性及影响垃圾燃烧效率因素多的问题,运用数值仿真方法对某垃圾焚烧炉床层垃圾燃烧进行了模拟,获得了垃圾质量流失速率、水分蒸发速率、挥发分释放速率、焦炭燃烧速率和烟气的温度;并在50~1 000 Nm3/min范围内改变一次风流量,获得了床层质量流失比值、过剩空气系数和烟气中各组分的质量百分比含量。仿真结果显示,一次风流量取值517.47~6`32.09 Nm3/min时燃烧效率较高;炉排两端区域的一次风流量在50~75 Nm3/min时,可以使垃圾床表面平均温度明显提高,而且还可以提高燃烧效率,同时减少供风总量,节约能源与动力资源。本研究对优化设计垃圾焚烧炉,提高床层内垃圾的燃烧效率有一定参考价值。     

交际教学法在大学英语教学中的应用

交际法已经发展成为一种世界规模的外语教学理论和教学方法,成为当今世界各国外语教学界普遍承认和接受的基本原则.通过对交际教学法的进一步研究分析,叙述了什么是交际教学法,阐述了运用交际教学法组织大学英语教学的模式和交际教学法在大学英语教学中的运用,指出教师应充分运用交际教学法的基本原理更好地来提高中国英语教学水平.     

冷却-高压静电一体化技术在高温定型机油烟废气净化中的应用

采用冷却-高压静电一体化技术处理印染企业的高温定型机油烟废气,将蒸发冷却、间接水冷、高压静电法集成一体.弥补了传统水喷淋技术与湿法静电技术存在二次污染的不足.通过优化参数,提高了污染物去除率和废油,余热的回收率,白坯布高温定型机每天每台可回收废油188 kg.     

超声波预处理提高污泥好氧消化性能研究

为评价超声波预处理对提高污泥生物消化的作用,采用超声波预处理与好氧消化衔接,测试了污泥消化的溶解性有机物(SCOD)、TSS及蛋白酶变化过程.结果表明,污泥超声波预处理效果较好的能量密度与时间分别为12 kW/L和10 min,此时有机物释放与能量输入之比较优;在此条件下,经预处理后的污泥好氧消化性能明显比未处理的高.消化时间为10.5 d时,经超声波预处理的污泥TSS减量42.7%,而未处理的污泥仅减量20.9%.经超声波预处理后,污泥中的蛋白酶活性明显提高;同时,超声波预处理释放出较多的可溶性物质.因此,增加的可溶性物质与蛋白酶活性使得污泥迅速降解,提高了污泥好氧消化效率,缩短了污泥好氧消化时间.     

高性能纤维在个体防护装备上的应用现状及前景分析

高性能纤维是从化学纤维演化而来，是指耐高温、耐气候、耐化学腐蚀、质量轻、强度高、模量高的特种纤维材料。本文结合几种典型的高性能纤维的具体性能，对高性能纤维在个体防护装备上的应用现状及前景作了分析，旨在进一步推动高性能纤维在个体防护装备上的应用，从而在不同的使用情况下增强个体防护装备对人体的保护功能。     

Investigation of carbonyl compound sources at a rural site in the Yangtze River Delta region of China

Carbonyl compounds are important intermediates in atmospheric photochemistry, but their primary sources are still not understood well. In this work, carbonyls, hydrocarbons, and alkyl nitrates were continuously measured during November 2011 at a rural site in the Yangtze River Delta region of China. Mixing ratios of carbonyls and hydrocarbons showed large fluctuations during the entire measurement. The average level for total measured volatile organic compounds during the pollution episode from 25th to 27th November, 2011 was 91.6 ppb, about 7 times the value for the clean period of 7th-8th, November, 2011. To preliminarily identify toluene sources at this site, the emission ratio of toluene to benzene (T/B) during the pollution episode was determined based on photochemical ages derived from the relationship of alkyl nitrates to their parent alkanes. The calculated T/B was 5.8 ppb/ppb, significantly higher than the values of 0.2-1.7 ppb/ppb for vehicular exhaust and other combustion sources, indicating the dominant influence of industrial emissions on ambient toluene. The contributions of industrial sources to ambient carbonyls were then calculated using a multiple linear regression fit model that used toluene and alkyl nitrates as respective tracers for industrial emission and secondary production. During the pollution episode, 18.5%, 69.0%, and 52.9% of measured formaldehyde, acetaldehyde, and acetone were considered to be attributable to industrial emissions. The emission ratios relative to toluene for formaldehyde, acetaldehyde, and acetone were determined to be 0.10, 0.20 and 0.40 ppb/ppb, respectively. More research on industrial carbonyl emission characteristics is needed to understand carbonyl sources better.     

Insights into metals in individual fine particles from municipal solid waste using synchrotron radiation-based micro-analytical techniques

Excessive inter-contamination with heavy metals hampers the application of biological treatment products derived from mixed or mechanically-sorted municipal solid waste (MSW). In this study, we investigated fine particles of < 2 mm, which are small fractions in MSW but constitute a significant component of the total heavy metal content, using bulk detection techniques. A total of 17 individual fine particles were evaluated using synchrotron radiation-based micro-X-ray fluorescence and micro-X-ray diffraction. We also discussed the association, speciation and source apportionment of heavy metals. Metals were found to exist in a diffuse distribution with heterogeneous intensities and intense hot-spots of < 10 μm within the fine particles. Zn-Cu, Pb-Fe and Fe-Mn-Cr had significant correlations in terms of spatial distribution. The overlapped enrichment, spatial association, and the mineral phases of metals revealed the potential sources of fine particles from size-reduced waste fractions (such as scraps of organic wastes or ceramics) or from the importation of other particles. The diverse sources of heavy metal pollutants within the fine particles suggested that separate collection and treatment of the biodegradable waste fraction (such as food waste) is a preferable means of facilitating the beneficial utilization of the stabilized products.     

Insights into metals in individual fine particles from municipal solid waste using synchrotron radiation-based micro-analytical techniques

Excessive inter-contamination with heavy metals hampers the application of biological treatment products derived from mixed or mechanically-sorted municipal solid waste(MSW). In this study, we investigated fine particles of 2 mm, which are small fractions in MSW but constitute a significant component of the total heavy metal content, using bulk detection techniques. A total of 17 individual fine particles were evaluated using synchrotron radiation-based micro-X-ray fluorescence and micro-X-ray diffraction. We also discussed the association, speciation and source apportionment of heavy metals. Metals were found to exist in a diffuse distribution with heterogeneous intensities and intense hot-spots of 10 μm within the fine particles. Zn–Cu, Pb–Fe and Fe–Mn–Cr had significant correlations in terms of spatial distribution. The overlapped enrichment, spatial association, and the mineral phases of metals revealed the potential sources of fine particles from size-reduced waste fractions(such as scraps of organic wastes or ceramics) or from the importation of other particles. The diverse sources of heavy metal pollutants within the fine particles suggested that separate collection and treatment of the biodegradable waste fraction(such as food waste) is a preferable means of facilitating the beneficial utilization of the stabilized products.     

以植被生物完整性评价梁子湖湖滨湿地生态系统健康

湖滨湿地植被是湖滨带生态系统的主要特征,以湖滨湿地植被为对象可评价湖滨带生态系统健康状况。通过对梁子湖湖滨湿地植被的详细调查,共鉴定出植物182种,隶属于52科128属,其中湿生植物147种,水生植物35种。水生植物中有20种挺水植物,6种浮叶植物和9种沉水植物。采用植被生物完整性(VIBI)方法评价梁子湖湖滨湿地生态系统健康,对21个备选指标进行筛选分析,建立了以挺水植物物种数、多年生植物物种数、外来物种百分比、香农多样性指数、植物区系质量指数FQAI、耐受性物种百分比、敏感性物种百分比为核心指标的评价体系,三分法对指标进行赋值,将梁子湖湖滨湿地划分为健康、良好、一般和较差4个等级。评价结果表明,梁子湖湖滨湿地22个调查位点中,处于健康状态的有3个位点,良好6个,共占总位点数的41%,一般和较差分别为7个和6个,共占59%。总体上看,东梁子湖和牛山湖湖滨湿地位点健康状况较好,而西梁子湖湖滨湿地差异性较大,山坡湖南部湖湾和前江大湖北部位点健康状况良好,张桥湖湖滨湿地健康状况一般,评价较差的6个位点集中在宁港湖周围和前江大湖南部沿岸。底质和人类活动如水位调控、围网养殖、放牧等是影响梁子湖湖滨湿地植被生物完整性的主要原因。